 |
 |
 |
 |
HI-POWERED
LED PASSING/SPOT LIGHTS – FOR HARLEY MOTORCYCLES [PLUG N PLAY]
Extremely Bright & draws very minimal power. Reduce the
load on your electrical system!
OUTPUT 3X Brightness compared to your stocks!
HDLED-50W are a Direct replacement for HD Passing
Lights [Stock Part # 68453-05]
PACKAGE CONTENTS: 2pcs FITMENT: Fits 2005 & Up Softails and Touring
Models that have Passing/Driving/Fog Lights that are not already LED from
Harley.
IF YOUR BIKE IS
2005 OR OLDER, YOU LIKELY HAVE H3 BULBS OR SEALED BEAMS. PLEASE CONFIRM BEFORE MAKING YOUR SELECTION
H3 BULBS USE PART NO: HDH3C
SEALED BEAMS USE PART NO: HDPL45
 Heat: These bulbs draw less than 1amp, but they are amazingly bright!
There is barely any heat that is generated from these bulbs and they make you
more visibly either day or night. They run extremely cool compared to your
stock bulbs. These are our best selling LED passing lights.
These closely match
LED and HID Headlamps and run at 6000k color temperature. Your passing lights will have a nice clean
look instead of the yellow tones of the standard stock bulbs. Upgrade to LED.
50W: (5watt led chip x 10 on-board = 50w) About 500LM each bulb
Wattage stated is equivalent in brightness not actual draw, they actually draw
much less power!
Our bulbs are custom manufactured and uses quality
components unlike the cheaper versions seen on the net.
Each bulb is custom manufactured to closely match the HID color
temperature that we sell. These Hi Powered Passing lights will compliment the
HID light(s) and upgrade them to the HID look. These are direct plug in
replacements. Simply remove your stock bulbs and replace them with these Hi
Powered LED passing light bulbs. Road tested and vibration proof. Our best sellers!
Most LED products out
there carry a standard 60 days warranty, we stand behind our lights and offer
an unconditional 1 year warranty.
They may look similar but unlike the cheap ones on the internet, these are of high quality and are custom manufactured and tested to work on your motorcycle.
IMPORTANT: Image
shown here has both LED passing lights with our original HID kit on. This
product page is for the HDLED-50W Hi-Powered LED Passing Lights only.
If you have sealed beams or H3 bulbs, CLICK HERE to go to our Passing Lights reference page to see which bulbs
you have.
These are direct replacement LED bulbs and do not ship with any wiring adapters. Please confirm by checking the lights on your bike to assure that they are direct replacements or check the "Passing Lights" guide below. Some older models such as 2005 and below, would require passing lamp adapters. Your motorcycle should already have the
appropriate connectors that looks similar to the connector shown here. However, if your motorcycle does not, you would need to order our
Passing Lamp Plug N Play Adapters [Product code: HD8PA]
These
are one of the best lighting upgrades you can put on your bike, GUARANTEED!
They are as bright as a 50w bulb but draws 1/3 the power! ADD DAYTIME AND NIGHT TIME VISIBILITY INSTANTLY!
|

|

 SATISFACTION GUARANTEED:
PATHFINDERLEDs are warranted
against defects for a period of 1 Year, unlike 60 days from other outlets,
satisfaction guaranteed. Always verify your bulb type before ordering.
These
are High Quality
"Instant Intensity" LED bulbs unlike cheap ones found on the
internet.
For CALIFORNIA residents
only:
WARNING: This product contains
chemicals including DEHP, which is known to the State of California to cause
cancer or birth defects or other reproductive harm. For more information visit
https://www.p65warnings.ca.gov
Please note that by posting this Proposition 65 warning, we are notifying
you that one or more of the Proposition 65 listed chemicals may be present in a
product. With SoCalMotoGear and PathFinderLED products, the exposure to these
chemicals may be of no significant risk to you, but out of caution, we have elected
to place this warning on our website to ensure our customers are informed.
YOUTUBE VIDEO
Installing PATHFINDERLED Passing Lights
- NOTE: This item will NOT fit motorcycles with a sealed beam housing..
- FITMENT: 06 AND UP. VERIFY BEFORE ORDERING.
How to Determine if you have Replaceable bulbs in your passing lights or Sealed Beams. Click Here: How to check your Passing Lights
1 YEAR WARRANTY
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Hi Powered LED Chips - 12v - Direct Replacements - Plug N Play, No flasher or EQ needed
- Color temp: 6000K - One of the brightest lights available for your passing lights
- The wattage stated is equivalent in brightness not actual draw, they actually draw much less.
- 50W: (5watt led chip x 10 onboard = 50W) 500LMS EA LED BULB
|
|
 |
 |
 |
 |

|