Seriously improve your lighting
Day or Night.
Custom designed and Road Tested on Harley Motorcycles.
This complete kit replaces your Headlight to HID and replaces your
dull yellow passing lights to Bright White LEDs!
Unlike other kits, you do not need to run bulky wiring back to your battery!
This professional Harley Bi-Xenon HID + LED Passing lights
Combo Kit will completely replace your factory lighting to our HID lighting and
will convert your passing lights to LEDs. This kit will enable you to have
HID's for your LO and HI beams and high powered LEDs for your passing lights that
will closely match your HID light. There is no other combo kit on the market
like it. Unlike cheap kits that uses a small halogen bulb for the high beams,
our kit is a true Bi-Xenon HID kit. This means the bulb will toggle up and down
to give you the HID high beam pattern when engaged.
This kit includes our 50W LED passing lights.This is one of the most popular Lighting packages that we offer and will convert your headlight to HID and passing lights to LEDs.
Choose the Standard 50W LED bulbs for your passing lights if your motorcycle is
2006 or up. If you have an 05 or older model, you possibly have either have an
H3 bulb or sealed beams in your passing lights. You will need to confirm which one you have.
Only choose the 50W H3 LED bulbs during checkout if you know that is the bulb you need, otherwise checkout with the standard option.
H3 type bulb it has a single pigtail connector and uses the base of
the bulb as ground. You would choose “H3 50W LED” during checkout, however,
If
your bike has a sealed beam which means the light bulbs cannot be replaced:If you are looking for a sealed
beam replacement, we have the (HDPL45) PATHFINDERLED Passing Lamps that are plug n play.
If you are unsure, you can also take a close up picture of
your passing lamps and email it to us and we’ll be happy to advise or you can
check our passing lights product page below for more details.
Email pictures: Service@SoCalMotoGear.com
Passing Lights reference page: http://www.SoCalMotoGear.com/Passinglights
NOTE:
* This kit will fit any Harley
motorcycle that does not use a sealed beam. As long as the bulbs are
replaceable, this H.I.D. kit should work.
Also, please make sure there is space
to mount the ballast which usually there is ample space in back of the
headlight bucket. Most 7inch headlamp motorcycles will have no problem.
With After Market parts,
slight modifications may be necessary on some bikes.
2006+ models do not need any adapters to work
with our twist on LED passing lights.
FITMENT : Non-Sealed Beam Road Kings, Soft tails, Electra Glides, Street Glides, and suitable for application in fairing/nacelle housings.
HDLED 50W LED BULBS OPTION: 
Heat: These bulbs DO NOT run hot compared to your standard stock halogen bulbs, they run much cooler.
Considering an LED HeadLamp? Our NEW 7 INCH PATHFINDERLED HEADLAMP will replace your main headlight to LED and outputs a better light than the Daymaker.
Click Here to see the PATHFINDERLED HD7M
For reference only. Customer bikes installed at Daytona Bike week 2014
Benefits of our lighting vs. Other lighting
- Projects a further and wider beam resulting in better coverage and visibility.
- Customers have reported side visibility is terrible on there setup until they upgraded to our LED passing lights.
- Our lights can keep your original factory look and maintain that tradition.
This custom Plug N Play kit includes:
- A Bi-Xenon H.I.D. Bulb (6000k = diamond white).
- 2 Hi-Powered LED Bulbs - must select at check out)
HDLED50W PAIR / H3C50W PAIR
- A professional grade weather-proof TruHids® Ballast.
-
A professional TruHids® Bi-Xenon direct connect cable.
- Instruction manual.
- Industrial strength double sided 3M adhesive pad.
- Alcohol wipe.
- Industrial strength zip ties.
Free Technical Support
*6000k temperature = diamond white
Harley Bi-Xenon HID + LED Passing lights combo 
