HIGH PERFORMANCE LED KIT FOR YOUR GOLD WING
THIS PRODUCT HAS MOVED, PLEASE CLICK HERE
The New PATHFINDERLED® Headlight kit for the GL1800/F6B is the first true High
Performance LED system for the HONDA GOLD WING. Unlike other LED bulbs on the market, our lights put out a fantastic beam which is much further and wider than competitive bulbs, GUARANTEED!
THIS LED KIT WILL DIRECTLY REPLACE YOUR STOCK BULBS TO LEDS.
Upgrade your stock lighting and experience LED lighting like never before. Our LEDs simply make you more visible during the day and if you ride at night, you
will certainly appreciate the changeover. Our LED upgrades your lights to bright white (5500k) while making you more visible on the road day or night, they draw less power from your battery which in turn reserves your charging system for other electronics. You will certainly appreciate the changeover.
Seriously Improves your lighting experience. This complete Plug N Play kit will replace your lights to High Performance LED.
NOTE: Some items in the image shown/video may look slightly different from the
actual parts you receive. The product(s) you receive may either
be an upgraded, improved or simply a re-designed model compared to what was used in the
image/video but delivers the same or better quality.
LED KIT INCLUDES :
- INCLUDES (2) HIGH PERFORMANCE LEDs (5000K)
- DIRECT CONNECT CABLES/ADAPTERS
- INSTRUCTIONAL GUIDE
You’ve probably heard of LEDS that don’t throw a good
light down the road and that’s true, most don’t. Unlike other LEDs on the
market that simply do not throw enough light, our LEDs will certainly do the
JOB. Our new Generation LEDs are designed to be used in headlight housings and
will certainly satisfy your lighting needs.
We guarantee you will be blown away compared to your stock bulbs!
Due to popular demand, our LOW BEAM LED KIT is now 4800LM.
Use same part number for both lo or high beam kits: [G18LEDH]
COMPATIBLE WITH KISAN PATHBLAZER HEADLIGHT
MODULATORS! (SEE BELOW)
HIGH PERFORMANCE LIGHTING
GET READY FOR THE NEXT GENERATION OF GOLD
REASONS WHY YOU SHOULD
UPGRADE TO LED HEADLIGHTS:
Compared to your stock incandescent bulbs, this is about a
3x over lighting upgrade. LEDs are much brighter and makes you more visible day or night.
Power: *Draws less than half the power (50%) less compared to your stock incandescent bulbs. Outputs a clean High Intensity brighter light.
*Less power draw from your battery means less load on your alternator so you can run other electrical equipment/accessories.
Instant Intensity: Never OUT RIDE
your lights again. See and be seen, Day or Night Visibility.
Instant On, No Warm Up Time: LED bulbs are INSTANT ON
They do not require any warm up time - May be compatible with headlight modulators.
Non-Directional LEDs: Unlike other LED
designs, our lights are non-directional. This means you will have a further and
wider beam pattern compared to other LEDs on the market.
New Passive Cooling: SOLID STATE DESIGN, NO MOVING PARTS, NO FANS, NO NOISE. Our LEDs utilize passive heat sink cooling where heat does not get
the light and efficiently cools the High Performance LED chips. Other cooling methods tested does not allow the heat to thoroughly dissipate, therefore causing premature led failure.
Headlight Modulator: Our LED lights have undergone rigorous testing by Kisan and is fully compatible with the PATHBLAZER.
See Kisan Part number: P115W-D (LED)
WITH CONFIDENCE - LONG SERVICE LIFE:
Although our LEDs have a long service life, we include a 1 year hassle free warranty/replacement
unlike other outlets that offer only 90 days.
Our kit is completely Plug N Play and includes everything you need to upgrade either your low or high beams. See part numbers below for Lo beam and High Beam kits.
PLUG N PLAY. Simply install the included headlight ring, then
twist to lock the bulb in place. It’s that simple!
[G18LEDH]: 5500K (@THEORETICAL MAXIMUM POWER AND LUMENS)
Power: firstname.lastname@example.orgAMPS PER BULB (STOCK 4-5AMPERS PER BULB)
OUR LED's draw about 1/3 - 1/2 the power compared to incandescent bulbs and reserves your charging system.
Lo Beam Installation Time: Appx 30min-1hr min
High Beam Installation Time: Appx 1-2 hours
THIS PRODUCT FITS ALL GL1800 AND F6B MOTORCYCLES FROM (2001-2017)
KIT INCLUDES (2) HIGH PERFORMANCE LED BULBS, DIRECT CONNECT CABLES/ADAPTERS.
LEDs ARE DESIGNED FOR OPTIMUM PERFORMANCE IN STOCK HOUSINGS.
REPLACEMENT "O-RING" LED ADAPTERS CAN BE PURCHASED HERE: PART NO. G18OR2
Slight modifications may be necessary when installing After Market parts.
NOTE: For this kit, if you choose to keep the rubber boot on, you will need to trim off one step.
Caution: Beware of
These are one of the best lights you can buy for your Wing. We back up what we
sell and if you aren’t happy with your purchase, you are welcome to return them
within 30 days of purchase and the lights are warranted for 1 year from date of
Please read our reviews as they speak for themselves.
Unfortunately, there has been some internet “TROLLS” that are on some GL1800
forums trying to give our product a bad name because they are bias in worshiping
a different brand, and have never used our product.
- Dynamic Sequential Front Indicator LED lights
- Rectangular 3in1 Fog light kit with Daytime Running
Lights and Amber Switchback LED.