UPGRADE TO OUR HIGH PERFORMANCE LED KIT TODAY AND GET READY FOR THE NEXT
GENERATION IN GOLD WING LIGHTING!
THIS SETUP REPLACES YOUR STOCK
(LOW OR HIGH BEAMS)
Depending on stock availability you may receive the all black or silver/black version.
Upgrade your stock lighting and experience LED lighting like
never before. Our LED lighting simply makes you more visible during the day and if you
ride at night, you will certainly appreciate the changeover. This setup upgrades your lights to bright white (6000k) while making you more visible on
the road day or night, they draw less power from your battery which in turn
reserves your charging system for other electronics.
You will certainly
appreciate the changeover and REPLACING your headlights to LED is one of the
best investments you can make on your bike.
Be Safe... Be Seen!
You can either replace your Lo Beams, your High Beams
or Both. Each kit includes 2 High Performance LEDs w/inline drivers and can be installed in either setup.
Unlike other lights on
the market our lights have been fit checked and road tested by seasoned
riders/enthusiasts so you can be assured you are getting a high quality product
for your bike.... Seriously improves your lighting experience.
Our new lights have an improved Jet-pro type heat-sink that efficiently absorbs and moves heat away from the LED allowing them to run much cooler than competing models. Better design, better value, better product!
Installation is even easier than before, no trimming/cutting of the rubber boot is required.
LED KIT INCLUDES : LED lights w/inline Driver, installation instructions.
G18H7S (1 KIT): Replaces your LOW OR HIGH BEAMS
Includes (2) PATHFINDERLED LEDs w/inline LED drivers.
G18H7P (2 KITS): Replaces your LOW AND HIGH BEAMS
Includes (4) PATHFINDERLED LEDs w/inline LED drivers [Add $110.00]
- INSTALLATION INSTRUCTIONS WITH VIDEO INSTALL LINK
- 1-YEAR WARRANTY FROM DATE OF PURCHASE (BUY WITH CONFIDENCE). RECEIPT REQUIRED
4000LM LED BULBS
6000K COLOR TEMP
12V @1.5AMPS (VISUALLY BRIGHT SIMILAR TO AN 80W BULB)
GL1800 2001-2017 and F6B motorcycles.
You’ve probably heard of LEDs that don’t throw a good
light down the road and that’s true, most don’t. Unlike other LEDs on the
market that simply do not throw enough light, our LEDs will certainly do the
JOB. Our new Generation LEDs are designed to be used in headlight housings and
will certainly satisfy your lighting needs.
We guarantee you will be blown away compared to your stock bulbs!
REASONS WHY YOU SHOULD
UPGRADE TO LED HEADLIGHTS:
Compared to your stock incandescent bulbs, this is about a
3x over lighting upgrade.
LEDs are much brighter and makes you more visible day or night.
Power: *Draws less than half the power (50%) less compared to your stock incandescent bulbs. Outputs a clean High Intensity brighter light.
*Less power draw from your battery means less load on your alternator so you can run other electrical equipment/accessories.
Instant Intensity: Never OUT RIDE
your lights again. See and be seen, Day or Night Visibility.
Instant On, No Warm Up Time: LED bulbs are INSTANT ON
They do not require any warm up time - May be compatible with headlight modulators.
Passive Cooling: SOLID STATE DESIGN, NO MOVING PARTS, NO FANS, NO NOISE.
New JET-PRO type heat sink absorbs and dissipates heat efficiently away from the LED bulb/body.
WITH CONFIDENCE -
LONG SERVICE LIFE:
LEDs ARE DESIGNED FOR OPTIMUM PERFORMANCE IN STOCK HOUSINGS.
Although our LEDs have a long service life, we include a 1 year hassle free warranty/replacement
unlike other outlets that offer only 90 days.
Lo Beam Installation Time: Appx 30min-1hr min
High Beam Installation Time: Appx 1-3 hours
- This kit does not require any modification on your Factory Rubber boot, you simply twist off the heat sink and reinstall after the rubber boot.
- Some items in the image shown/video may look slightly different from the
actual parts you receive. The product(s) you receive may either
be an upgraded, improved or simply a re-designed model compared to what was used in the
image/video but delivers the same or better quality.
Caution: Beware of
Internet Trolls at Gold Wing Forums.
We back up what we
sell and if you aren’t happy with your purchase, you are welcome to return them
within 30 days of purchase and the lights are warranted for 1 year from date of
purchase. Proof of purchase required.
Please read our reviews as they speak for themselves. Unfortunately, there has been some internet “TROLLS” that are on some GL1800
forums trying to give our product a bad name because they are bias in worshiping
a different brand.
THESE PRODUCTS BELOW ARE ALSO AVAILABLE TO COMPLETE THE LOOK AND UPGRADES YOUR BIKE TO LEDs!
- Dynamic Sequential Front Indicator LED lights with Sequential LED Technology
GL1800 SEQUENTIAL LED SPOILER LIGHT WITH DYNAMIC/PULSATING BRAKE
For CALIFORNIA residents
WARNING: This product contains
chemicals including DEHP, which is known to the State of California to cause
cancer or birth defects or other reproductive harm. For more information visit
Please note that by posting this Proposition 65 warning, we are notifying
you that one or more of the Proposition 65 listed chemicals may be present in a
product. With SoCalMotoGear and PathFinderLED products, the exposure to these
chemicals may be of no significant risk to you, but out of caution, we have elected
to place this warning on our website to ensure our customers are informed